Flash Card Drive (internal) in standard 3.5" case; 40 -pin IDE connector with 2.54 mm pin spacing. EasyLite CF Drive with slot with front eject button for Compact-Flash Cards (Type I or Type II) and Microdrive miniature hard disks. EasyLite CF Drive is compatible with all memory cards with an appropriate CompactFlash adapter such as SmartMedia Cards, SD Cards, MultiMediaCards, Memory Sticks or xD-Cards (the cards must support a 3.3 Volt supply). EasyLite SD Drive with front slot for SD Cards or MultiMedia-Cards with push-in/push-out connector; compatible with Redu-ced Size (RS) MultiMediaCards with a corresponding adapter.
Supporting operating systems without the the of driver are Windows 95/98, ME, 2000 and XP. Under Windows NT memory cards can be operated as removable media only with the appropriate driver. Removable media cannot be exchanged under MS DOS without reboot. Linux compatible in some cases.
Master or slave mode configurable with jumpers or cable select. Drives bootable provided this is supported by the BIOS of the host computer. Rugged version of the EasyLite CF Drive with metal guide rails available on request. Version with extended temperature range available on request.
Support hotline and rapid service directly from the manufacturer.
Technical Specifications
| Hardware | |
| Interface | IDE, 40-pin, 2.54 mm pin spacing |
| Memory card slots | CompactFlash Card Type I or II Environmental Specifications |
| Dimensions (L x W x H) | 149 x 101.6 x 25.4 mm standard 3.5" drive dimensions |
| Electrical | |
| DC input voltage | 5 Volt ±5% |
| Power consumption | Depends on cards used |
| Environmental Specifications | |
| Temperature | 0° to +70°C (operating); 40° to +85°C (non-operating) |
| Humidity | 0% to 90%, non-condensing |
| Software | |
| Supported OS | Windows 95/98, ME, 2000, XP, Windows NT, MS-DOS |